{"product_id":"extreme-networks-summit-x450-g2-48p-10ge4-ethernet-switch-16179t","title":"Extreme Networks Summit X450-G2-48p-10GE4 Ethernet Switch 16179T","description":"The Summit X450-G2 series is based on Extreme Networks revolutionary ExtremeXOS, a highly resilient OS that provides continuous uptime, manageability and operational efficiency. Each switch offers the same high-performance, non- blocking hardware technology, in the Extreme Networks tradition of simplifying network deployments through the use of common hardware and software throughout the network. The Summit X450-G2 switches are effective campus edge switches with IEEE 802.3at PoE-plus. The Summit X450-G2 series is also an option for DSLAM or CMTS aggregation, or for active Ethernet access.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eComprehensive Security Management \u003c\/b\u003e\u003cbr\u003e \u003cul\u003e \u003cli\u003eRole-based policy and host integrity enforcement, and identity management\u003c\/li\u003e \u003cli\u003eUniversal Port Dynamic Security Profiles to provide fine granular security policies in the network \u003c\/li\u003e \u003cli\u003eThreat detection and response instrumentation to react to network intrusion with CLEAR-Flow Security Rules Engine \u003c\/li\u003e \u003cli\u003eDenial of Service (DoS) protection and IP security against man-in-the-middle and DoS attacks to harden the network infrastructure \u003c\/li\u003e \u003cli\u003eRole-based Policy enables support for policy profiles to secure and provision network resources based upon the role the user or device plays within the network. \u003c\/li\u003e \u003c\/ul\u003e Flexible Port Configuration All models come equipped with either 4 ports of SFP+ 10 GbE or 4 ports of SFP 1GbE resident on the faceplate of each model. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eHigh-Performance Stacking\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Up to eight Summit X450-G2 switches can be stacked using two different methods of stacking: SummitStack-V, and SummitStack-V84. Each X450-G2 unit comes equipped with 2 ports of 21 Gigabit stacking ports via a QSFP interface. Standard passive 40Gb copper cables can be used for stacking X450-G2s together.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eSUMMITSTACK-V - FLEXIBLE STACKING OVER 10 GIGABIT ETHERNET \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eExtremeXOS supports the SummitStack-V capability using 2 of the native 10 GbE ports on the faceplate as stacking ports, enabling the use of standard cabling and optics technologies used for 10 GbE SFP+, SummitStack-V provides long-distance stacking connectivity of up to 40 km while reducing the cable complexity of implementing a stacking solution. SummitStack-V is compatible with Summit X440, X450-G2 switches with 10Gb uplinks, X460, X460-G2 with 10Gb uplinks, X480, X670, X670V, X670-G2 and X770 switches running the same version of ExtremeXOS. SummitStack-V enabled 10 GbE ports must be physically direct-connected.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eSUMMITSTACK-V84 - HIGH-SPEED STACKING OVER DEDICATED STACKING PORTS \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Summit X450-G2 also supports high-speed 84 Gbps stacking, which is ideal for demanding applications where a high volume of traffic traverses through the stacking links, yet bandwidth is not compromised through stacking. SummitStack-V84 is supported over passive copper QSFP cables (up to 7m). SummitStack-V84 is only supported on Summit X450-G2 switches running the same version of ExtremeXOS. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eINTELLIGENT SWITCHING\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Summit X450-G2 supports sophisticated and intelligent Layer 2 switching, as well as Layer 3 IPv4\/IPv6 routing including policy-based switching\/routing, Provider Bridges, bidirectional ingress and egress Access Control Lists, and bandwidth control by 8 Kbps granularity both for ingress and egress.\n\u003cul\u003e\n\u003cli\u003eFeatures 48 networking ports to meet the requirements of the most demanding workgroups\u003c\/li\u003e\n\u003cli\u003eCascade to other network devices through the uplink port to expand your local area network\u003c\/li\u003e\n\u003cli\u003eStack port provides an easy and hassle-free way to extend your office network\u003c\/li\u003e\n\u003cli\u003eUp to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks\u003c\/li\u003e\n\u003cli\u003eCan work as layer 3 routing for scalable network design\u003c\/li\u003e\n\u003cli\u003eRack mounting enables you to organize wires \u0026amp; secure cables for professional installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Extreme Networks","offers":[{"title":"Default Title","offer_id":50259882508562,"sku":"16179T","price":0.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/9995\/7778\/files\/162056677.webp?v=1726438483","url":"https:\/\/www.ziestech.com\/products\/extreme-networks-summit-x450-g2-48p-10ge4-ethernet-switch-16179t","provider":"Ziestech Inc","version":"1.0","type":"link"}